PANTONE matching reference to each color shown above is purely subjective to our view of each color. These references have not been evaluated by Pantone, Inc. for accuracy. Nonetheless, we have taken great care to provide such information and feel certain the suggested matches are within shades from each other. PANTONE® and other Pantone, Inc. trademarks are the property of Pantone, Inc.

¹ Due to the non-gloss surface properties of Matte colors, additional maintenance and care is required. Matte surfaces may retain light scratches/abrasions through the life of the installed product. We do not recommend waxing/polishing over Matte products. Please refer to our Technical Bulletin for Care Information.

² Manufactured by Avery Dennison. Please refer to our Technical Bulletin for Warranty Information.

³ Some vinyl colors are manufactured with a transparent adhesive. Thus, due to pigmentation properties of the film color, the product may appear slightly different in shade on a light color surface versus a darker color substrate. 'Click' here to view an example.  If you're unsure of how a vinyl color will look on your vehicle we encourage placing an actual sample on the vehicle's surface. Samples are available for most colors and can easily be obtained by following this link:  Color Sample Request

Metallic colored vinyl materials consist of a small to medium metallic particle flake composition while the Ultra Metallic vinyl materials feature a larger flake particle. Due to the fact that most Luster colors are set on a silver backing, these vinyl materials deliver a look that has more of a "silverish" sheen.

Ultra Metallic vinyl film products are not recommended for horizontal applications such as Hoods, Roofs or Rear Deck Lids. Due to surface characteristics of Ultra Metallic vinyl, water/moisture tends to be absorbed by the material, thereby producing conditions whereby acid dew penetration and fungus buildup may occur. Such occurrences may create staining and premature vinyl degradation. Thus, Ultra Metallic vinyl materials are generally recommended for vertical applications and are NOT warranted for use on horizontal applications.

To extend the life of Metallic colored vinyl materials, please review our Technical Bulletin in regard to suggested Graphic Care.

¹ Manufactured by Avery Dennison. Please refer to our Technical Bulletin for Warranty Information

² Some vinyl colors are manufactured with a transparent adhesive. Thus, due to pigmentation properties of the film color, the product may appear slightly different in shade on a light color surface versus a darker color substrate. 'Click' here to view an example.  If you're unsure of how a vinyl color will look on your vehicle we encourage placing an actual sample on the vehicle's surface. Samples are available for most colors and can easily be obtained by following this link:  Color Sample Request

³ Color considered a Specialty Color. Extra charge may apply.

⁴ Depending on the application, film may consist of 2 mil Premium Cast or a 4 mil Premium Wrapping Cast vinyl product with an Air Release adhesive system - both with a protective 2 mil clear laminate. Due to the overall thickness of Wrapping Cast manufactured product, application of certain vinyl cut graphic kits may be difficult and may require assistance from a professional installer. Moreover, wet application of Wrapping Cast product is not recommended.

†PANTONE matching reference to each color shown above is purely subjective to our view of each color. These references have not been evaluated by Pantone, Inc. for accuracy. While Metallic & Luster colors project various shades of color at different angles in various lighting configurations, we've taken great care to provide such information and feel certain the suggested matches are within shades from each other. PANTONE® and other Pantone, Inc. trademarks are the property of Pantone, Inc.

Reflective colored vinyl materials are manufactured with minute particles of glass and/or metal which gives it certain reflective qualities. As such, one should be careful during the installation of such materials as they tend to tear easily. When installing this product, take care to make sure the location of the graphic/decal is where it needs to be because it is highly unlikely that the graphic/decal can be repositioned after it "sticks" down to the application surface. Reflective vinyl products are NOT warranted for use on horizontal applications. Lastly, Reflective products MUST be installed dry - installing this product with application fluid voids Product Warranty.

PANTONE matching reference to each color shown above is purely subjective to our view of each color. These references have not been evaluated by Pantone, Inc. for accuracy. Nonetheless, we have taken great care to provide such information and feel certain the suggested matches are within shades from each other. PANTONE® and other Pantone, Inc. trademarks are the property of Pantone, Inc.

¹ Manufactured by Avery Dennison. Please refer to our Technical Bulletin for Warranty Information

i

Installing colored transparent films on vehicle headlight and tail light fixtures limits the amount of light that would normally emit from factory lenses. Thus, we recommend the installation of these films for Show or Off Road Use only.

Use of light fixtures with colored transparent films on roads and highways may be illegal and may subject the user to penalties and/or fines. Please check your local, state or provincial laws and ordinances prior to application. Furthermore, illegal use of certain aftermarket vehicle products such as colored transparent films may void insurance coverage(s).

'Click' Here for Larger Image

Shown Reduced in Size

Color Chart below displays Solid (top) and Fade (bottom) colors of our DURACOLOR thermally printed products. Black and Silver fades are shown on Light and Medium color surfaces while White is shown on Medium and Dark color surfaces. Other color fades are shown on Light, Medium and Dark color surfaces. While the actual color of your vehicle may be different from the Light, Medium or Dark surfaces as shown, the chart provides a simulated view of how the color fades on such surfaces.

Due to the fact a White Primer is used under transparent colors (i.e., Yellow, Red, Lime Green, Process Cyan, etc.), there may, at times, appear a fine, rather miniscule, white line next to the color printed. An example of this occurrence is shown on our Fade Chart under the "Orange Fades with Gold Highlights".

PANTONE matching reference to each color shown above is purely subjective to our view of each color. These references have not been evaluated by Pantone, Inc. for accuracy. Nonetheless, we have taken great care to provide such information and feel certain the suggested matches are within shades from each other. PANTONE® and other Pantone, Inc. trademarks are the property of Pantone, Inc.